FW: SU!: RE: Tiles/Coaster
Locked
FW: SU!: RE: Tiles/Coaster
 
|
Anyone know why Staz-on would come off these coasters that Beverly stamped with Staz-on? Coleen Coleen Astalos, Stampin' Up! Demonstrator Alamosa, CO, See my website at http://alamosa.stampinup.net <http://alamosa.stampinup.net/> Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! <http://www.cartville.com/app/?Clk=2848375> From: Beverly Robertson [mailto: Sent: Saturday, November 02, 2013 12:24 PM To: Subject: Re: SU!: RE: Tiles/Coaster It comes of with condensation. I was very surprised and embarrassed since I made some for home and some for gifts. They were very cute, the print just didn't stay. Beverly J Robertson Stampin' Up! Demonstrator (248)-330-5780 http://www.stampinup.net/esuite/home/bevrobertson <http://www.seeklogo.com/images/S/Stampin_Up_-logo-4F1917FCFC-seeklogo.com.gif> _____ From: Coleen Astalos < To: 'Beverly Robertson' < Cc: 'Sudsol' < Sent: Saturday, November 2, 2013 11:58 AM Subject: RE: SU!: RE: Tiles/Coaster First of all, I'm surprised that the Staz-on is coming off. I would think on a porous surface like this the stazon wouldn't be coming off. What type of condition is it coming off in? Water, heat, etc.. If you seal a tumbled tile, then it's not going to absorb the water anymore. So let's see if we can figure out why your staz-on is coming off in the first place. Coleen Coleen Astalos, Stampin' Up! Demonstrator Alamosa, CO, See my website at http://alamosa.stampinup.net <http://alamosa.stampinup.net/> Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! <http://www.cartville.com/app/?Clk=2848375> From: Sent: Friday, November 01, 2013 7:45 PM To: Cc: 'Sudsol' Subject: Re: SU!: RE: Tiles/Coaster The coasters are Chiaro Tumbled coasters. Beverly J Robertson Stampin' Up! Demonstrator (248)-330-5780 http://www.stampinup.net/esuite/home/bevrobertson <http://www.seeklogo.com/images/S/Stampin_Up_-logo-4F1917FCFC-seeklogo.com.gif> _____ From: Coleen Astalos < To: Cc: 'Sudsol' < Sent: Friday, November 1, 2013 9:09 PM Subject: SU!: RE: Tiles/Coaster What types of tiles are you stamping on - glossy or unfinished (like the thirsty stones)? This will make a difference on what you'd want to put on them. Coleen Coleen Astalos, Stampin' Up! Demonstrator Alamosa, CO, See my website at http://alamosa.stampinup.net <http://alamosa.stampinup.net/> Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! <http://www.cartville.com/app/?Clk=2848375> From: Sent: Friday, November 01, 2013 7:03 PM To: Subject: SU!: Tiles/Coaster I am new to sudol and wondering if anyone know what spray or covering can be applied to coasters to keep there stamped image. I have used Stazon, heated in the oven but the image comes off in a short time. Any suggestions? Thanks. !
Coleen Astalos
SLB Member |
Re: FW: SU!: RE: Tiles/Coaster
|
did she spray the staz on with a mat coating? you will need to spray at least 3 coats with drying in between. On Tue, Nov 5, 2013 at 3:39 PM, Coleen Astalos < > > > Anyone know why Staz-on would come off these coasters that Beverly stamped > with Staz-on? > > Coleen > > > > Coleen Astalos, Stampin' Up! Demonstrator > Alamosa, CO, > See my website at http://alamosa.stampinup.net > Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline!<http://www.cartville.com/app/?Clk=2848375> > > > > *From:* Beverly Robertson [mailto: > *Sent:* Saturday, November 02, 2013 12:24 PM > *To:* > *Subject:* Re: SU!: RE: Tiles/Coaster > > > > It comes of with condensation. I was very surprised and embarrassed since > I made some for home and some for gifts. They were very cute, the print > just didn't stay. > > > > Beverly J Robertson > Stampin' Up! Demonstrator > (248)-330-5780 > http://www.stampinup.net/esuite/home/bevrobertson > > ------------------------------ > > *From:* Coleen Astalos < > *To:* 'Beverly Robertson' < > *Cc:* 'Sudsol' < > *Sent:* Saturday, November 2, 2013 11:58 AM > *Subject:* RE: SU!: RE: Tiles/Coaster > > > > > > First of all, I'm surprised that the Staz-on is coming off. I would think > on a porous surface like this the stazon wouldn't be coming off. What type > of condition is it coming off in? Water, heat, etc.. > > > > If you seal a tumbled tile, then it's not going to absorb the water > anymore. So let's see if we can figure out why your staz-on is coming off > in the first place. > > > > Coleen > > > > Coleen Astalos, Stampin' Up! Demonstrator > Alamosa, CO, > See my website at http://alamosa.stampinup.net > Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline!<http://www.cartville.com/app/?Clk=2848375> > > > > *From:* > *On Behalf Of *Beverly Robertson > *Sent:* Friday, November 01, 2013 7:45 PM > *To:* > *Cc:* 'Sudsol' > *Subject:* Re: SU!: RE: Tiles/Coaster > > > > > > The coasters are Chiaro Tumbled coasters. > > > > Beverly J Robertson > Stampin' Up! Demonstrator > (248)-330-5780 > http://www.stampinup.net/esuite/home/bevrobertson > > ------------------------------ > > *From:* Coleen Astalos < > *To:* > *Cc:* 'Sudsol' < > *Sent:* Friday, November 1, 2013 9:09 PM > *Subject:* SU!: RE: Tiles/Coaster > > > > > > What types of tiles are you stamping on - glossy or unfinished (like the > thirsty stones)? > > > > This will make a difference on what you'd want to put on them. > > Coleen > > > > Coleen Astalos, Stampin' Up! Demonstrator > Alamosa, CO, > See my website at http://alamosa.stampinup.net > Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline!<http://www.cartville.com/app/?Clk=2848375> > > > > *From:* > *On Behalf Of * > *Sent:* Friday, November 01, 2013 7:03 PM > *To:* > *Subject:* SU!: Tiles/Coaster > > > > > > I am new to sudol and wondering if anyone know what spray or covering can > be applied to coasters to keep there stamped image. I have used Stazon, > heated in the oven but the image comes off in a short time. Any > suggestions? Thanks. > > ! > > > > > > > -- Happy Stampin' Liz Holloway Stampin' Up! Independent Demonstrator, Sr. Consultant http://stampersplus.com http://www.stampinup.net/esuite/home/stampersplus tel: 604-879-9275 cel: 604-307-3273 |
Re: SU!: RE: Tiles/Coaster
|
|
In reply to this post by Coleen Astalos
Did she seal it before stamping? That wouldn't allow the staz on to adhere to the coaster. Barbara Rathmell Stampin' Up! Demonstrator 614-316-4258 www.stampwithbarbara.stampinup.net -----Original Message----- From: Coleen Astalos < To: sudsol < Cc: brj29 < Sent: Tue, Nov 5, 2013 6:40 pm Subject: FW: SU!: RE: Tiles/Coaster Anyone know why Staz-on would come off these coasters that Beverly stamped with Staz-on? Coleen Coleen Astalos, Stampin' Up! Demonstrator Alamosa, CO, See my website at http://alamosa.stampinup.net Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! From: Beverly Robertson [mailto: Sent: Saturday, November 02, 2013 12:24 PM To: Subject: Re: SU!: RE: Tiles/Coaster It comes of with condensation. I was very surprised and embarrassed since I made some for home and some for gifts. They were very cute, the print just didn't stay. Beverly J Robertson Stampin' Up! Demonstrator (248)-330-5780 http://www.stampinup.net/esu ite/home/bevrobertson From: Coleen Astalos < To: 'Beverly Robertson' < Cc: 'Sudsol' < Sent: Saturday, November 2, 2013 11:58 AM Subject: RE: SU!: RE: Tiles/Coaster First of all, I'm surprised that the Staz-on is coming off. I would think on a porous surface like this the stazon wouldn't be coming off. What type of condition is it coming off in? Water, heat, etc.. If you seal a tumbled tile, then it's not going to absorb the water anymore. So let's see if we can figure out why your staz-on is coming off in the first place. Coleen Coleen Astalos, Stampin' Up! Demonstrator Alamosa, CO, See my website at http://alamosa. stampinup.net Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! From: Sent: Friday, November 01, 2013 7:45 PM To: Cc: 'Sudsol' Subject: Re: SU!: RE: Tiles/Coaster The coasters are Chiaro Tumbled coasters. Beverly J Robertson Stampin' Up! Demonstrator (248)-330-5780 http://www.stampinup.net/esuite/home/bevrobertson From: Coleen Astalos < To: Cc: 'Sudsol' < Sent: Friday, November 1, 2013 9:09 PM Subject: SU!: RE: Tiles/Coaster What types of tiles are you stamping on - glossy or unfinished (like the thirsty stones)? This will make a difference on what you'd want to put on them. Coleen Coleen Astalos, Stampin' Up! Demonstrator Alamosa, CO, See my website at http://alamosa.stampinup.net Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! From: Sent: Friday, November 01, 2013 7:03 PM To: Subject: SU!: Tiles/Coaster I am new to sudol and wondering if anyone know what spray or covering can be applied to coasters to keep there stamped image. I have used Stazon, heated in the oven but the image comes off in a short time. Any suggestions? Thanks. ! |
Re: FW: SU!: RE: Tiles/Coaster
|
|
In reply to this post by Liz Holloway
I did, but I don't remember what the spray was this time one of the member recommended Krylon Spray and that is what I used. Hoping it works better this time. Thanks everyone for your help. Beverly J Robertson Stampin' Up! Demonstrator (248)-330-5780 http://www.stampinup.net/esuite/home/bevrobertson ________________________________ From: Liz Holloway < To: Coleen Astalos < Cc: SUDSOL YahooGroups < Sent: Tuesday, November 5, 2013 7:15 PM Subject: Re: FW: SU!: RE: Tiles/Coaster did she spray the staz on with a mat coating? you will need to spray at least 3 coats with drying in between. On Tue, Nov 5, 2013 at 3:39 PM, Coleen Astalos < > >Anyone know why Staz-on would come off these coasters that Beverly stamped with Staz-on? >Coleen > >Coleen Astalos, Stampin' Up! Demonstrator >Alamosa, CO, >See my website at http://alamosa.stampinup.net >Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! > >From:Beverly Robertson [mailto: >Sent: Saturday, November 02, 2013 12:24 PM >To: >Subject: Re: SU!: RE: Tiles/Coaster > >It comes of with condensation. I was very surprised and embarrassed since I made some for home and some for gifts. They were very cute, the print just didn't stay. > >Beverly J Robertson >Stampin' Up! Demonstrator >(248)-330-5780 >http://www.stampinup.net/esuite/home/bevrobertson > > > >________________________________ > >From:Coleen Astalos < >To: 'Beverly Robertson' < >Cc: 'Sudsol' < >Sent: Saturday, November 2, 2013 11:58 AM >Subject: RE: SU!: RE: Tiles/Coaster > > >First of all, I'm surprised that the Staz-on is coming off. I would think on a porous surface like this the stazon wouldn't be coming off. What type of condition is it coming off in? Water, heat, etc.. > >If you seal a tumbled tile, then it's not going to absorb the water anymore. So let's see if we can figure out why your staz-on is coming off in the first place. > >Coleen > >Coleen Astalos, Stampin' Up! Demonstrator >Alamosa, CO, >See my website at http://alamosa.stampinup.net >Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! > >From: >Sent: Friday, November 01, 2013 7:45 PM >To: >Cc: 'Sudsol' >Subject: Re: SU!: RE: Tiles/Coaster > > >The coasters are Chiaro Tumbled coasters. > >Beverly J Robertson >Stampin' Up! Demonstrator >(248)-330-5780 >http://www.stampinup.net/esuite/home/bevrobertson > > > >________________________________ > >From:Coleen Astalos < >To: >Cc: 'Sudsol' < >Sent: Friday, November 1, 2013 9:09 PM >Subject: SU!: RE: Tiles/Coaster > > >What types of tiles are you stamping on - glossy or unfinished (like the thirsty stones)? > >This will make a difference on what you'd want to put on them. >Coleen > >Coleen Astalos, Stampin' Up! Demonstrator >Alamosa, CO, >See my website at http://alamosa.stampinup.net >Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! > >From: >Sent: Friday, November 01, 2013 7:03 PM >To: >Subject: SU!: Tiles/Coaster > > >I am new to sudol and wondering if anyone know what spray or covering can be applied to coasters to keep there stamped image. I have used Stazon, heated in the oven but the image comes off in a short time. Any suggestions? Thanks. >! > > -- Happy Stampin' Liz Holloway Stampin' Up! Independent Demonstrator, Sr. Consultant http://stampersplus.com http://www.stampinup.net/esuite/home/stampersplus tel: 604-879-9275 cel: 604-307-3273 |
Re: FW: SU!: RE: Tiles/Coaster
|
|
that is odd. On Tue, Nov 5, 2013 at 4:19 PM, Beverly Robertson < > I did, but I don't remember what the spray was this time one of the member > recommended Krylon > Spray and that is what I used. Hoping it works better this time. Thanks > everyone for your help. > > Beverly J Robertson > Stampin' Up! Demonstrator > (248)-330-5780 > http://www.stampinup.net/esuite/home/bevrobertson > > > ------------------------------ > *From:* Liz Holloway < > *To:* Coleen Astalos < > *Cc:* SUDSOL YahooGroups < > *Sent:* Tuesday, November 5, 2013 7:15 PM > *Subject:* Re: FW: SU!: RE: Tiles/Coaster > > > did she spray the staz on with a mat coating? you will need to spray at > least 3 coats with drying in between. > > > On Tue, Nov 5, 2013 at 3:39 PM, Coleen Astalos < > > > Anyone know why Staz-on would come off these coasters that Beverly > stamped with Staz-on? > Coleen > > Coleen Astalos, Stampin' Up! Demonstrator > Alamosa, CO, > See my website at http://alamosa.stampinup.net > Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline!<http://www.cartville.com/app/?Clk=2848375> > > *From:* Beverly Robertson [mailto: > *Sent:* Saturday, November 02, 2013 12:24 PM > *To:* > *Subject:* Re: SU!: RE: Tiles/Coaster > > It comes of with condensation. I was very surprised and embarrassed since > I made some for home and some for gifts. They were very cute, the print > just didn't stay. > > Beverly J Robertson > Stampin' Up! Demonstrator > (248)-330-5780 > http://www.stampinup.net/esuite/home/bevrobertson > > ------------------------------ > *From:* Coleen Astalos < > *To:* 'Beverly Robertson' < > *Cc:* 'Sudsol' < > *Sent:* Saturday, November 2, 2013 11:58 AM > *Subject:* RE: SU!: RE: Tiles/Coaster > > > First of all, I'm surprised that the Staz-on is coming off. I would think > on a porous surface like this the stazon wouldn't be coming off. What type > of condition is it coming off in? Water, heat, etc.. > > If you seal a tumbled tile, then it's not going to absorb the water > anymore. So let's see if we can figure out why your staz-on is coming off > in the first place. > > Coleen > > Coleen Astalos, Stampin' Up! Demonstrator > Alamosa, CO, > See my website at http://alamosa.stampinup.net > Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline!<http://www.cartville.com/app/?Clk=2848375> > > *From:* > *On Behalf Of *Beverly Robertson > *Sent:* Friday, November 01, 2013 7:45 PM > *To:* > *Cc:* 'Sudsol' > *Subject:* Re: SU!: RE: Tiles/Coaster > > > The coasters are Chiaro Tumbled coasters. > > Beverly J Robertson > Stampin' Up! Demonstrator > (248)-330-5780 > http://www.stampinup.net/esuite/home/bevrobertson > > ------------------------------ > *From:* Coleen Astalos < > *To:* > *Cc:* 'Sudsol' < > *Sent:* Friday, November 1, 2013 9:09 PM > *Subject:* SU!: RE: Tiles/Coaster > > > What types of tiles are you stamping on - glossy or unfinished (like the > thirsty stones)? > > This will make a difference on what you'd want to put on them. > Coleen > > Coleen Astalos, Stampin' Up! Demonstrator > Alamosa, CO, > See my website at http://alamosa.stampinup.net > Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline!<http://www.cartville.com/app/?Clk=2848375> > > *From:* > *On Behalf Of * > *Sent:* Friday, November 01, 2013 7:03 PM > *To:* > *Subject:* SU!: Tiles/Coaster > > > I am new to sudol and wondering if anyone know what spray or covering can > be applied to coasters to keep there stamped image. I have used Stazon, > heated in the oven but the image comes off in a short time. Any > suggestions? Thanks. > ! > > > > > > > -- > Happy Stampin' > Liz Holloway > Stampin' Up! Independent Demonstrator, Sr. Consultant > > http://stampersplus.com > http://www.stampinup.net/esuite/home/stampersplus > > tel: 604-879-9275 > cel: 604-307-3273 > > > > -- Happy Stampin' Liz Holloway Stampin' Up! Independent Demonstrator, Sr. Consultant http://stampersplus.com http://www.stampinup.net/esuite/home/stampersplus tel: 604-879-9275 cel: 604-307-3273 |
Re: FW: SU!: RE: Tiles/Coaster
|
|
I have some that the regular color faded, but the black stazon has not. Were the tiles dust free, it the pad juicy enough, did she let it dry or even bake it. That is all I have Ellen Williams On Tue, Nov 5, 2013 at 6:22 PM, Liz Holloway < > > > that is odd. > > > On Tue, Nov 5, 2013 at 4:19 PM, Beverly Robertson < > >> I did, but I don't remember what the spray was this time one of the >> member recommended Krylon >> Spray and that is what I used. Hoping it works better this time. Thanks >> everyone for your help. >> >> Beverly J Robertson >> Stampin' Up! Demonstrator >> (248)-330-5780 >> http://www.stampinup.net/esuite/home/bevrobertson >> >> >> ------------------------------ >> *From:* Liz Holloway < >> *To:* Coleen Astalos < >> *Cc:* SUDSOL YahooGroups < >> *Sent:* Tuesday, November 5, 2013 7:15 PM >> *Subject:* Re: FW: SU!: RE: Tiles/Coaster >> >> >> did she spray the staz on with a mat coating? you will need to spray at >> least 3 coats with drying in between. >> >> >> On Tue, Nov 5, 2013 at 3:39 PM, Coleen Astalos < >> >> >> Anyone know why Staz-on would come off these coasters that Beverly >> stamped with Staz-on? >> Coleen >> >> Coleen Astalos, Stampin' Up! Demonstrator >> Alamosa, CO, >> See my website at http://alamosa.stampinup.net >> Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline!<http://www.cartville.com/app/?Clk=2848375> >> >> *From:* Beverly Robertson [mailto: >> *Sent:* Saturday, November 02, 2013 12:24 PM >> *To:* >> *Subject:* Re: SU!: RE: Tiles/Coaster >> >> It comes of with condensation. I was very surprised and embarrassed >> since I made some for home and some for gifts. They were very cute, the >> print just didn't stay. >> >> Beverly J Robertson >> Stampin' Up! Demonstrator >> (248)-330-5780 >> http://www.stampinup.net/esuite/home/bevrobertson >> >> ------------------------------ >> *From:* Coleen Astalos < >> *To:* 'Beverly Robertson' < >> *Cc:* 'Sudsol' < >> *Sent:* Saturday, November 2, 2013 11:58 AM >> *Subject:* RE: SU!: RE: Tiles/Coaster >> >> >> First of all, I'm surprised that the Staz-on is coming off. I would >> think on a porous surface like this the stazon wouldn't be coming off. >> What type of condition is it coming off in? Water, heat, etc.. >> >> If you seal a tumbled tile, then it's not going to absorb the water >> anymore. So let's see if we can figure out why your staz-on is coming off >> in the first place. >> >> Coleen >> >> Coleen Astalos, Stampin' Up! Demonstrator >> Alamosa, CO, >> See my website at http://alamosa.stampinup.net >> Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline!<http://www.cartville.com/app/?Clk=2848375> >> >> *From:* >> *On Behalf Of *Beverly Robertson >> *Sent:* Friday, November 01, 2013 7:45 PM >> *To:* >> *Cc:* 'Sudsol' >> *Subject:* Re: SU!: RE: Tiles/Coaster >> >> >> The coasters are Chiaro Tumbled coasters. >> >> Beverly J Robertson >> Stampin' Up! Demonstrator >> (248)-330-5780 >> http://www.stampinup.net/esuite/home/bevrobertson >> >> ------------------------------ >> *From:* Coleen Astalos < >> *To:* >> *Cc:* 'Sudsol' < >> *Sent:* Friday, November 1, 2013 9:09 PM >> *Subject:* SU!: RE: Tiles/Coaster >> >> >> What types of tiles are you stamping on - glossy or unfinished (like the >> thirsty stones)? >> >> This will make a difference on what you'd want to put on them. >> Coleen >> >> Coleen Astalos, Stampin' Up! Demonstrator >> Alamosa, CO, >> See my website at http://alamosa.stampinup.net >> Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline!<http://www.cartville.com/app/?Clk=2848375> >> >> *From:* >> *On Behalf Of * >> *Sent:* Friday, November 01, 2013 7:03 PM >> *To:* >> *Subject:* SU!: Tiles/Coaster >> >> >> I am new to sudol and wondering if anyone know what spray or covering can >> be applied to coasters to keep there stamped image. I have used Stazon, >> heated in the oven but the image comes off in a short time. Any >> suggestions? Thanks. >> ! >> >> >> >> >> >> >> -- >> Happy Stampin' >> Liz Holloway >> Stampin' Up! Independent Demonstrator, Sr. Consultant >> >> http://stampersplus.com >> http://www.stampinup.net/esuite/home/stampersplus >> >> tel: 604-879-9275 >> cel: 604-307-3273 >> >> >> > > > -- > Happy Stampin' > Liz Holloway > Stampin' Up! Independent Demonstrator, Sr. Consultant > > http://stampersplus.com > http://www.stampinup.net/esuite/home/stampersplus > > tel: 604-879-9275 > cel: 604-307-3273 > > > |
Re: SU!: RE: Tiles/Coaster
|
|
In reply to this post by Coleen Astalos
Comments- I made coasters using the same tiles last year but found it was necessary to spray one light coating of Krylon Matte finish to keep the ink from fading. Stazon worked best but there was still a fading issue, Krylons defeated purpose of absorbing condensation but coasters looked nice. Am using Omni gel to create transfer of images printed from MDS to put onto tile coasters. So far it seems to work. Will let you know if it's successful and will share technique next week. Sent from my iPad > On Nov 5, 2013, at 6:39 PM, "Coleen Astalos" < > > Anyone know why Staz-on would come off these coasters that Beverly stamped with Staz-on? > > Coleen > > > > Coleen Astalos, Stampin' Up! Demonstrator > Alamosa, CO, > See my website at http://alamosa.stampinup.net > Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! > > > > From: Beverly Robertson [mailto: > Sent: Saturday, November 02, 2013 12:24 PM > To: > Subject: Re: SU!: RE: Tiles/Coaster > > > > It comes of with condensation. I was very surprised and embarrassed since I made some for home and some for gifts. They were very cute, the print just didn't stay. > > > > Beverly J Robertson > Stampin' Up! Demonstrator > (248)-330-5780 > http://www.stampinup.net/esuite/home/bevrobertson > > > > From: Coleen Astalos < > To: 'Beverly Robertson' < > Cc: 'Sudsol' < > Sent: Saturday, November 2, 2013 11:58 AM > Subject: RE: SU!: RE: Tiles/Coaster > > > > > > First of all, I'm surprised that the Staz-on is coming off. I would think on a porous surface like this the stazon wouldn't be coming off. What type of condition is it coming off in? Water, heat, etc.. > > > > If you seal a tumbled tile, then it's not going to absorb the water anymore. So let's see if we can figure out why your staz-on is coming off in the first place. > > > > Coleen > > > > Coleen Astalos, Stampin' Up! Demonstrator > Alamosa, CO, > See my website at http://alamosa.stampinup.net > Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! > > > > From: > Sent: Friday, November 01, 2013 7:45 PM > To: > Cc: 'Sudsol' > Subject: Re: SU!: RE: Tiles/Coaster > > > > > > The coasters are Chiaro Tumbled coasters. > > > > Beverly J Robertson > Stampin' Up! Demonstrator > (248)-330-5780 > http://www.stampinup.net/esuite/home/bevrobertson > > > > From: Coleen Astalos < > To: > Cc: 'Sudsol' < > Sent: Friday, November 1, 2013 9:09 PM > Subject: SU!: RE: Tiles/Coaster > > > > > > What types of tiles are you stamping on - glossy or unfinished (like the thirsty stones)? > > > > This will make a difference on what you'd want to put on them. > > Coleen > > > > Coleen Astalos, Stampin' Up! Demonstrator > Alamosa, CO, > See my website at http://alamosa.stampinup.net > Are you a demonstrator? Join me on SUDSOL - Your 24/7 Upline! > > > > From: > Sent: Friday, November 01, 2013 7:03 PM > To: > Subject: SU!: Tiles/Coaster > > > > > > I am new to sudol and wondering if anyone know what spray or covering can be applied to coasters to keep there stamped image. I have used Stazon, heated in the oven but the image comes off in a short time. Any suggestions? Thanks. > > ! > > > > > > > |
«
Return to Creative Idea Shares
|
1 view|%1 views
| Free forum by Nabble | Edit this page |