Curled Embossing Folder

classic Classic list List threaded Threaded
11 messages Options Prev Topic | Next Topic
Reply | Threaded
Open this post in threaded view
|

Curled Embossing Folder

Robin Messenheimer
Hi, all!

One of my customers has had one of her embossing folders curl up as shown.  It's the Coastal Weave folder which is a 3D folder. She uses a Cricut about which I know nothing. Is there a way to fix this?
Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com
Reply | Threaded
Open this post in threaded view
|

Re: SU!: Curled Embossing Folder

grantj

A Cricut is an electronic die cutting machine. Our dies and embossing folders ARE NOT meant to go through ANY kind of electric machine, unless they use the Tim Holtz Vagabond which is made by Sizzix.

If she used this folder in a Cricut, I'd say it's her error.

Jan Grant

Springfield, IL 62704

On 09/16/2020 2:09 PM SUDSOL [Robin Messenheimer] via Product Q&As <ml+s1100894n55480h79@.nabble> wrote:


rmessenheimer@gmail.com?subject=Curled Embossing Folder
If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@

Hi, all!

One of my customers has had one of her embossing folders curl up as shown.  It's the Coastal Weave folder which is a 3D folder. She uses a Cricut about which I know nothing. Is there a way to fix this?
Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480.html
To start a new topic under Product Q&As, email ml+s1100894n1954h73@.nabble
To unsubscribe from SUDSOL, click here.
Reply | Threaded
Open this post in threaded view
|

Re: SU!: Curled Embossing Folder

Sue Erickson

She could try warming the embossing folder in hot water until it is more flexible and then try to gently bend it the other way.

On Sep 16, 2020, at 12:20 PM, SUDSOL [grantj] via Product Q&As <ml+s1100894n55484h82@n7.nabble.com> wrote:

revjanstamps@comcast.net?subject=Re:%20SU!:%20Curled%20Embossing%20Folder
If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: revjanstamps@comcast.net


A Cricut is an electronic die cutting machine. Our dies and embossing folders ARE NOT meant to go through ANY kind of electric machine, unless they use the Tim Holtz Vagabond which is made by Sizzix.

If she used this folder in a Cricut, I'd say it's her error.

Jan Grant

Springfield, IL 62704

On 09/16/2020 2:09 PM SUDSOL [Robin Messenheimer] via Product Q&As <ml+s1100894n55480h79@.nabble> wrote:


rmessenheimer@gmail.com?subject=Curled Embossing Folder
If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@

Hi, all!

One of my customers has had one of her embossing folders curl up as shown.  It's the Coastal Weave folder which is a 3D folder. She uses a Cricut about which I know nothing. Is there a way to fix this?
Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480.html
To start a new topic under Product Q&As, email ml+s1100894n1954h73@.nabble
To unsubscribe from SUDSOL, click here.


If you want the reply to go ONLY to grantj, please change the email address to: revjanstamps@comcast.net
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55484.html
To start a new topic under Product Q&As, ml+s1100894n1954h52@n7.nabble.com
To unsubscribe from Product Q&As, click here.

Reply | Threaded
Open this post in threaded view
|

RE: SU!: Curled Embossing Folder

Robin Messenheimer
In reply to this post by grantj

Whatever she is using is a manual machine, not electric. But she’s just asking how she could fix this. I’ve given her some advice on changing the pads she’s using.  Thanks, anyway.

 

Robin

 

From: ml+s1100894n55484h73@.nabble <ml+s1100894n55484h73@.nabble>
Sent: Wednesday, September 16, 2020 9:21 AM
To: SUDSOL Group <rmessenheimer@>
Subject: Re: SU!: Curled Embossing Folder

 

revjanstamps@comcast.net?subject=Re:%20SU!:%20Curled%20Embossing%20Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: revjanstamps@


 

A Cricut is an electronic die cutting machine. Our dies and embossing folders ARE NOT meant to go through ANY kind of electric machine, unless they use the Tim Holtz Vagabond which is made by Sizzix.

 

If she used this folder in a Cricut, I'd say it's her error.

Jan Grant

Springfield, IL 62704

On 09/16/2020 2:09 PM SUDSOL [Robin Messenheimer] via Product Q&As <ml+s1100894n55480h79@.nabble> wrote:

 

 

rmessenheimer@?subject=Curled Embossing Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@


Hi, all!

One of my customers has had one of her embossing folders curl up as shown.  It's the Coastal Weave folder which is a 3D folder. She uses a Cricut about which I know nothing. Is there a way to fix this? Image removed by sender.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com

 


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480.html

To start a new topic under Product Q&As, email ml+s1100894n1954h73@.nabble
To unsubscribe from SUDSOL, click here.

 


If you want the reply to go ONLY to grantj, please change the email address to: revjanstamps@comcast.net
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55484.html

To start a new topic under Product Q&As, email ml+s1100894n1954h43@.nabble
To unsubscribe from Product Q&As, click here.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com
Reply | Threaded
Open this post in threaded view
|

RE: SU!: Curled Embossing Folder

Robin Messenheimer
In reply to this post by Sue Erickson

Thanks, Sue.

 

Robin

From: ml+s1100894n55487h66@.nabble <ml+s1100894n55487h66@.nabble>
Sent: Wednesday, September 16, 2020 9:53 AM
To: SUDSOL Group <rmessenheimer@>
Subject: Re: SU!: Curled Embossing Folder

 

sue@soggystamper.com?subject=Re:%20SU!:%20Curled%20Embossing%20Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: sue@



She could try warming the embossing folder in hot water until it is more flexible and then try to gently bend it the other way.



On Sep 16, 2020, at 12:20 PM, SUDSOL [grantj] via Product Q&As <ml+s1100894n55484h82@.nabble> wrote:

 

revjanstamps@?subject=Re:%20SU!:%20Curled%20Embossing%20Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: revjanstamps@


 

A Cricut is an electronic die cutting machine. Our dies and embossing folders ARE NOT meant to go through ANY kind of electric machine, unless they use the Tim Holtz Vagabond which is made by Sizzix.

 

If she used this folder in a Cricut, I'd say it's her error.

Jan Grant

Springfield, IL 62704

On 09/16/2020 2:09 PM SUDSOL [Robin Messenheimer] via Product Q&As <ml+s1100894n55480h79@.nabble> wrote:

 

 

rmessenheimer@gmail.com?subject=Curled Embossing Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@


Hi, all!

One of my customers has had one of her embossing folders curl up as shown.  It's the Coastal Weave folder which is a 3D folder. She uses a Cricut about which I know nothing. Is there a way to fix this? Image removed by sender.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com

 


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480.html

To start a new topic under Product Q&As, email ml+s1100894n1954h73@.nabble
To unsubscribe from SUDSOL, click here.

 


If you want the reply to go ONLY to grantj, please change the email address to: revjanstamps@
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55484.html

To start a new topic under Product Q&As, ml+s1100894n1954h52@.nabble
To unsubscribe from Product Q&As, click here.

 


If you want the reply to go ONLY to Sue Erickson, please change the email address to: sue@soggystamper.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55487.html

To start a new topic under Product Q&As, email ml+s1100894n1954h43@.nabble
To unsubscribe from Product Q&As, click here.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com
Reply | Threaded
Open this post in threaded view
|

Re: SU!: Curled Embossing Folder

Lois Folla
In reply to this post by Robin Messenheimer

Robin,

I had done that to one of mine a while ago with our folder and our big shit. The reason it happened to me was because a customer was working with it when  it was to tight cranking through. Yet I she kept going. I was helping someone else.   Mine never went back in shape but still worked. I did have to use post it tape on smaller pieces after I did the damage.  Note to self, if its ruff to crank, STOP and check plates etc. 

That is why I started to charge a $5 class club fee. This way I would have money to replace items that were ruined. I did need to buy a new one for classes but reminded the girls what not to do. 

My customer wanted to replace it but I told her, thank you so much, but I will. ♡

Lois Folla
Stampin' Up! Manager
stampwithlois@gmail.com
CP: 732-598-5026

Shop: www.loisfolla.stampinup.net
Blog: www.StampinPress.com

On Wed, Sep 16, 2020, 4:24 PM SUDSOL [Robin Messenheimer] via Product Q&As <ml%2Bs1100894n55488h44@n7.nabble.com> wrote:
rmessenheimer@gmail.com?subject=RE:+SU!:+Curled+Embossing+Folder
If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@gmail.com


Whatever she is using is a manual machine, not electric. But she’s just asking how she could fix this. I’ve given her some advice on changing the pads she’s using.  Thanks, anyway.

 

Robin

 

From: ml+s1100894n55484h73@.nabble <ml+s1100894n55484h73@.nabble>
Sent: Wednesday, September 16, 2020 9:21 AM
To: SUDSOL Group <rmessenheimer@>
Subject: Re: SU!: Curled Embossing Folder

 

revjanstamps@...?subject=Re:%20SU!:%20Curled%20Embossing%20Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: revjanstamps@


 

A Cricut is an electronic die cutting machine. Our dies and embossing folders ARE NOT meant to go through ANY kind of electric machine, unless they use the Tim Holtz Vagabond which is made by Sizzix.

 

If she used this folder in a Cricut, I'd say it's her error.

Jan Grant

Springfield, IL 62704

On 09/16/2020 2:09 PM SUDSOL [Robin Messenheimer] via Product Q&As <ml+s1100894n55480h79@.nabble> wrote:

 

 

rmessenheimer@?subject=Curled Embossing Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@


Hi, all!

One of my customers has had one of her embossing folders curl up as shown.  It's the Coastal Weave folder which is a 3D folder. She uses a Cricut about which I know nothing. Is there a way to fix this? Image removed by sender.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com

 


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480.html

To start a new topic under Product Q&As, email ml+s1100894n1954h73@.nabble
To unsubscribe from SUDSOL, click here.

 


If you want the reply to go ONLY to grantj, please change the email address to: revjanstamps@comcast.net
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55484.html

To start a new topic under Product Q&As, email ml+s1100894n1954h43@.nabble
To unsubscribe from Product Q&As, click here.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55488.html
To start a new topic under Product Q&As, email ml%2Bs1100894n1954h90@n7.nabble.com
To unsubscribe from Product Q&As, click here.
Reply | Threaded
Open this post in threaded view
|

Re: SU!: Curled Embossing Folder

Judi Carpenter

OOOoops!  Your Big WHAT?  Couldn't resist.  Sorry....
 
Judi
 
Judi Carpenter, Decatur, IL
SUDSOL Gallery Coordinator
Haf2Stamp Team Leader
717 Crestline Drive, Decatur, IL 62526
217-875-0092    jcarpy02@aol.com (zero by 2)
 
In a message dated 9/16/2020 3:45:49 PM Central Standard Time, ml+s1100894n55490h87@.nabble writes:
 
StampWithLois@gmail.com?subject=Re: SU!: Curled Embossing Folder
If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: StampWithLois@gmail.com

 

Robin,
 
I had done that to one of mine a while ago with our folder and our big shit. The reason it happened to me was because a customer was working with it when it was to tight cranking through. Yet I she kept going. I was helping someone else. Mine never went back in shape but still worked. I did have to use post it tape on smaller pieces after I did the damage. Note to self, if its ruff to crank, STOP and check plates etc.
 
That is why I started to charge a $5 class club fee. This way I would have money to replace items that were ruined. I did need to buy a new one for classes but reminded the girls what not to do.
 
My customer wanted to replace it but I told her, thank you so much, but I will. ♡

Lois Folla
Stampin' Up! Manager
stampwithlois@gmail.com
CP: 732-598-5026

Shop: www.loisfolla.stampinup.net
Blog: www.StampinPress.com

On Wed, Sep 16, 2020, 4:24 PM SUDSOL [Robin Messenheimer] via Product Q&As < ml%2Bs1100894n55488h44@n7.nabble.com > wrote:
rmessenheimer@?subject=RE:+SU!:+Curled+Embossing+Folder
If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@gmail.com

 

Whatever she is using is a manual machine, not electric. But she’s just asking how she could fix this. I’ve given her some advice on changing the pads she’s using. Thanks, anyway.

 

Robin

 

From: ml+s1100894n55484h73@.nabble <ml+s1100894n55484h73@.nabble>
Sent: Wednesday, September 16, 2020 9:21 AM
To: SUDSOL Group <rmessenheimer@>
Subject: Re: SU!: Curled Embossing Folder

 

revjanstamps@...?subject=Re:%20SU!:%20Curled%20Embossing%20Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: revjanstamps@


 

A Cricut is an electronic die cutting machine. Our dies and embossing folders ARE NOT meant to go through ANY kind of electric machine, unless they use the Tim Holtz Vagabond which is made by Sizzix.

 

If she used this folder in a Cricut, I'd say it's her error.

Jan Grant

Springfield, IL 62704

On 09/16/2020 2:09 PM SUDSOL [Robin Messenheimer] via Product Q&As <ml+s1100894n55480h79@.nabble> wrote:

 

 

rmessenheimer@?subject=Curled Embossing Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@


Hi, all!

One of my customers has had one of her embossing folders curl up as shown. It's the Coastal Weave folder which is a 3D folder. She uses a Cricut about which I know nothing. Is there a way to fix this? Image removed by sender.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com

 


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480.html

To start a new topic under Product Q&As, email ml+s1100894n1954h73@.nabble
To unsubscribe from SUDSOL, click here.

 


If you want the reply to go ONLY to grantj, please change the email address to: revjanstamps@comcast.net
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55484.html

To start a new topic under Product Q&As, email ml+s1100894n1954h43@.nabble
To unsubscribe from Product Q&As, click here.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55488.html
To start a new topic under Product Q&As, email ml%2Bs1100894n1954h90@n7.nabble.com
To unsubscribe from Product Q&As, click here.


If you want the reply to go ONLY to Lois Folla, please change the email address to: StampWithLois@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55490.html
To start a new topic under Product Q&As, email ml+s1100894n1954h71@n7.nabble.com
To unsubscribe from Product Q&As, click here.

Reply | Threaded
Open this post in threaded view
|

Re: SU!: Curled Embossing Folder

Peri Beal
In reply to this post by Lois Folla

Thank you so much for the typo! I needed a good chuckle right now 😄

Peri

On Wed, Sep 16, 2020, 3:45 PM SUDSOL [Lois Folla] via Product Q&As <ml%2Bs1100894n55490h15@n7.nabble.com> wrote:
StampWithLois@gmail.com?subject=Re:+SU!:+Curled+Embossing+Folder
If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: StampWithLois@gmail.com


Robin,

I had done that to one of mine a while ago with our folder and our big shit. The reason it happened to me was because a customer was working with it when it was to tight cranking through. Yet I she kept going. I was helping someone else. Mine never went back in shape but still worked. I did have to use post it tape on smaller pieces after I did the damage. Note to self, if its ruff to crank, STOP and check plates etc.

That is why I started to charge a $5 class club fee. This way I would have money to replace items that were ruined. I did need to buy a new one for classes but reminded the girls what not to do.

My customer wanted to replace it but I told her, thank you so much, but I will. ♡

Lois Folla
Stampin' Up! Manager
stampwithlois@gmail.com
CP: 732-598-5026

Shop: www.loisfolla.stampinup.net
Blog: www.StampinPress.com

On Wed, Sep 16, 2020, 4:24 PM SUDSOL [Robin Messenheimer] via Product Q&As <ml%252Bs1100894n55488h44@n7.nabble.com> wrote:
rmessenheimer@...?subject=RE:+SU!:+Curled+Embossing+Folder
If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@gmail.com


Whatever she is using is a manual machine, not electric. But she’s just asking how she could fix this. I’ve given her some advice on changing the pads she’s using. Thanks, anyway.

Robin

From: ml+s1100894n55484h73@.nabble <ml+s1100894n55484h73@.nabble>
Sent: Wednesday, September 16, 2020 9:21 AM
To: SUDSOL Group <rmessenheimer@>
Subject: Re: SU!: Curled Embossing Folder

revjanstamps@...?subject=Re:%20SU!:%20Curled%20Embossing%20Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: revjanstamps@


A Cricut is an electronic die cutting machine. Our dies and embossing folders ARE NOT meant to go through ANY kind of electric machine, unless they use the Tim Holtz Vagabond which is made by Sizzix.

If she used this folder in a Cricut, I'd say it's her error.

Jan Grant

Springfield, IL 62704

On 09/16/2020 2:09 PM SUDSOL [Robin Messenheimer] via Product Q&As <ml+s1100894n55480h79@.nabble> wrote:

rmessenheimer@?subject=Curled Embossing Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@


Hi, all!

One of my customers has had one of her embossing folders curl up as shown. It's the Coastal Weave folder which is a 3D folder. She uses a Cricut about which I know nothing. Is there a way to fix this? Image removed by sender.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480.html

To start a new topic under Product Q&As, email ml+s1100894n1954h73@.nabble
To unsubscribe from SUDSOL, click here.


If you want the reply to go ONLY to grantj, please change the email address to: revjanstamps@comcast.net
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55484.html

To start a new topic under Product Q&As, email ml+s1100894n1954h43@.nabble
To unsubscribe from Product Q&As, click here.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55488.html
To start a new topic under Product Q&As, email ml%252Bs1100894n1954h90@n7.nabble.com
To unsubscribe from Product Q&As, click here.


If you want the reply to go ONLY to Lois Folla, please change the email address to: StampWithLois@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55490.html
To start a new topic under Product Q&As, email ml%2Bs1100894n1954h99@n7.nabble.com
To unsubscribe from SUDSOL, click here.
Reply | Threaded
Open this post in threaded view
|

Re: SU!: Curled Embossing Folder

Lois Folla
In reply to this post by Judi Carpenter

Lol left it in there for you guys to smile!!! But the rest I meant to be in English,  but oh my. I need to stop emailing from my cp. Ok and I have way to much on my mind right now. 

Scare who I kept switching to my customer and myself. Ha ha ha




Lois Folla
Stampin' Up! Manager
stampwithlois@gmail.com
CP: 732-598-5026

Shop: www.loisfolla.stampinup.net
Blog: www.StampinPress.com

On Wed, Sep 16, 2020, 4:47 PM SUDSOL [Judi Carpenter] via Product Q&As <ml%2Bs1100894n55491h37@n7.nabble.com> wrote:
jcarpy02@aol.com?subject=Re:+SU!:+Curled+Embossing+Folder
If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: jcarpy02@aol.com


OOOoops!  Your Big WHAT?  Couldn't resist.  Sorry....
 
Judi
 
Judi Carpenter, Decatur, IL
SUDSOL Gallery Coordinator
Haf2Stamp Team Leader
717 Crestline Drive, Decatur, IL 62526
217-875-0092    jcarpy02@aol.com (zero by 2)
 
In a message dated 9/16/2020 3:45:49 PM Central Standard Time, ml+s1100894n55490h87@.nabble writes:
 
StampWithLois@...?subject=Re: SU!: Curled Embossing Folder
If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: StampWithLois@gmail.com

 

Robin,
 
I had done that to one of mine a while ago with our folder and our big shit. The reason it happened to me was because a customer was working with it when it was to tight cranking through. Yet I she kept going. I was helping someone else. Mine never went back in shape but still worked. I did have to use post it tape on smaller pieces after I did the damage. Note to self, if its ruff to crank, STOP and check plates etc.
 
That is why I started to charge a $5 class club fee. This way I would have money to replace items that were ruined. I did need to buy a new one for classes but reminded the girls what not to do.
 
My customer wanted to replace it but I told her, thank you so much, but I will. ♡

Lois Folla
Stampin' Up! Manager
stampwithlois@gmail.com
CP: 732-598-5026

Shop: www.loisfolla.stampinup.net
Blog: www.StampinPress.com

On Wed, Sep 16, 2020, 4:24 PM SUDSOL [Robin Messenheimer] via Product Q&As < ml%252Bs1100894n55488h44@n7.nabble.com > wrote:
rmessenheimer@?subject=RE:+SU!:+Curled+Embossing+Folder
If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@gmail.com

 

Whatever she is using is a manual machine, not electric. But she’s just asking how she could fix this. I’ve given her some advice on changing the pads she’s using. Thanks, anyway.

 

Robin

 

From: ml+s1100894n55484h73@.nabble <ml+s1100894n55484h73@.nabble>
Sent: Wednesday, September 16, 2020 9:21 AM
To: SUDSOL Group <rmessenheimer@>
Subject: Re: SU!: Curled Embossing Folder

 

revjanstamps@...?subject=Re:%20SU!:%20Curled%20Embossing%20Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: revjanstamps@


 

A Cricut is an electronic die cutting machine. Our dies and embossing folders ARE NOT meant to go through ANY kind of electric machine, unless they use the Tim Holtz Vagabond which is made by Sizzix.

 

If she used this folder in a Cricut, I'd say it's her error.

Jan Grant

Springfield, IL 62704

On 09/16/2020 2:09 PM SUDSOL [Robin Messenheimer] via Product Q&As <ml+s1100894n55480h79@.nabble> wrote:

 

 

rmessenheimer@?subject=Curled Embossing Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@


Hi, all!

One of my customers has had one of her embossing folders curl up as shown. It's the Coastal Weave folder which is a 3D folder. She uses a Cricut about which I know nothing. Is there a way to fix this? Image removed by sender.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com

 


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480.html

To start a new topic under Product Q&As, email ml+s1100894n1954h73@.nabble
To unsubscribe from SUDSOL, click here.

 


If you want the reply to go ONLY to grantj, please change the email address to: revjanstamps@comcast.net
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55484.html

To start a new topic under Product Q&As, email ml+s1100894n1954h43@.nabble
To unsubscribe from Product Q&As, click here.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55488.html
To start a new topic under Product Q&As, email ml%252Bs1100894n1954h90@n7.nabble.com
To unsubscribe from Product Q&As, click here.


If you want the reply to go ONLY to Lois Folla, please change the email address to: StampWithLois@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55490.html
To start a new topic under Product Q&As, email ml%2Bs1100894n1954h71@n7.nabble.com
To unsubscribe from Product Q&As, click here.



If you want the reply to go ONLY to Judi Carpenter, please change the email address to: jcarpy02@aol.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55491.html
To start a new topic under Product Q&As, email ml%2Bs1100894n1954h90@n7.nabble.com
To unsubscribe from Product Q&As, click here.
Reply | Threaded
Open this post in threaded view
|

RE: SU!: Curled Embossing Folder

Cathy Hansen

So I had something similar happen – only it was with a demo who was using one of my 3D embossing folders at a retreat.  She put the clear plate UNDER the embossing folder instead of on top.  I hadn’t been paying any attention because I thought she knew what she was doing – she embosses stuff all the time for our stamp camps – so it wasn’t until she had run it through the Big Shot several times that I noticed and corrected her.  The folder is still bent, but it works.

 

Cathy Hansen

(Still trusting every demo I know to know what they’re doing . . . sigh)

 

From: ml+s1100894n55493h86@.nabble <ml+s1100894n55493h86@.nabble>
Sent: Wednesday, September 16, 2020 3:28 PM
To: SUDSOL Group <cihansen04@>
Subject: Re: SU!: Curled Embossing Folder

 

StampWithLois@gmail.com?subject=Re:%20SU!:%20Curled%20Embossing%20Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: StampWithLois@gmail.com


 

Lol left it in there for you guys to smile!!! But the rest I meant to be in English, but oh my. I need to stop emailing from my cp. Ok and I have way to much on my mind right now.

 

Scare who I kept switching to my customer and myself. Ha ha ha

 

 

 

Lois Folla
Stampin' Up! Manager
stampwithlois@gmail.com
CP: 732-598-5026

Shop: www.loisfolla.stampinup.net
Blog: www.StampinPress.com

 

On Wed, Sep 16, 2020, 4:47 PM SUDSOL [Judi Carpenter] via Product Q&As <ml%2Bs1100894n55491h37@n7.nabble.com> wrote:

jcarpy02@aol.com?subject=Re:+SU!:+Curled+Embossing+Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: jcarpy02@aol.com


 

OOOoops! Your Big WHAT? Couldn't resist. Sorry....

Judi

Judi Carpenter, Decatur, IL

SUDSOL Gallery Coordinator

Haf2Stamp Team Leader

717 Crestline Drive, Decatur, IL 62526

217-875-0092 jcarpy02@aol.com (zero by 2)

In a message dated 9/16/2020 3:45:49 PM Central Standard Time, ml+s1100894n55490h87@.nabble writes:

StampWithLois@...?subject=Re: SU!: Curled Embossing Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: StampWithLois@gmail.com


 

Robin,

I had done that to one of mine a while ago with our folder and our big shit. The reason it happened to me was because a customer was working with it when it was to tight cranking through. Yet I she kept going. I was helping someone else. Mine never went back in shape but still worked. I did have to use post it tape on smaller pieces after I did the damage. Note to self, if its ruff to crank, STOP and check plates etc.

That is why I started to charge a $5 class club fee. This way I would have money to replace items that were ruined. I did need to buy a new one for classes but reminded the girls what not to do.

My customer wanted to replace it but I told her, thank you so much, but I will.

Lois Folla
Stampin' Up! Manager
stampwithlois@gmail.com
CP: 732-598-5026

Shop: www.loisfolla.stampinup.net
Blog: www.StampinPress.com

 

On Wed, Sep 16, 2020, 4:24 PM SUDSOL [Robin Messenheimer] via Product Q&As < ml%252Bs1100894n55488h44@n7.nabble.com > wrote:

rmessenheimer@?subject=RE:+SU!:+Curled+Embossing+Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@gmail.com


 

Whatever she is using is a manual machine, not electric. But she’s just asking how she could fix this. I’ve given her some advice on changing the pads she’s using. Thanks, anyway.

Robin

From: ml+s1100894n55484h73@.nabble <ml+s1100894n55484h73@.nabble>
Sent: Wednesday, September 16, 2020 9:21 AM
To: SUDSOL Group <rmessenheimer@>
Subject: Re: SU!: Curled Embossing Folder

revjanstamps@...?subject=Re:%20SU!:%20Curled%20Embossing%20Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: revjanstamps@


A Cricut is an electronic die cutting machine. Our dies and embossing folders ARE NOT meant to go through ANY kind of electric machine, unless they use the Tim Holtz Vagabond which is made by Sizzix.

If she used this folder in a Cricut, I'd say it's her error.

Jan Grant

Springfield, IL 62704

On 09/16/2020 2:09 PM SUDSOL [Robin Messenheimer] via Product Q&As <ml+s1100894n55480h79@.nabble> wrote:

rmessenheimer@?subject=Curled Embossing Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@


Hi, all!

One of my customers has had one of her embossing folders curl up as shown. It's the Coastal Weave folder which is a 3D folder. She uses a Cricut about which I know nothing. Is there a way to fix this? Image removed by sender.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480.html

To start a new topic under Product Q&As, email ml+s1100894n1954h73@.nabble
To unsubscribe from SUDSOL, click here.


If you want the reply to go ONLY to grantj, please change the email address to: revjanstamps@comcast.net
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55484.html

To start a new topic under Product Q&As, email ml+s1100894n1954h43@.nabble
To unsubscribe from Product Q&As, click here.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com

 


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55488.html

To start a new topic under Product Q&As, email ml%252Bs1100894n1954h90@n7.nabble.com
To unsubscribe from Product Q&As, click here.

 


If you want the reply to go ONLY to Lois Folla, please change the email address to: StampWithLois@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55490.html

To start a new topic under Product Q&As, email ml%2Bs1100894n1954h71@n7.nabble.com
To unsubscribe from Product Q&As, click here.

 


If you want the reply to go ONLY to Judi Carpenter, please change the email address to: jcarpy02@aol.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55491.html

To start a new topic under Product Q&As, email ml%2Bs1100894n1954h90@n7.nabble.com
To unsubscribe from Product Q&As, click here.

 


If you want the reply to go ONLY to Lois Folla, please change the email address to: StampWithLois@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480p55493.html

To start a new topic under Product Q&As, email ml+s1100894n1954h77@n7.nabble.com
To unsubscribe from Product Q&As, click here.

Reply | Threaded
Open this post in threaded view
|

RE: Curled Embossing Folder

Robin Messenheimer
In reply to this post by Robin Messenheimer

Thank you all for your responses. I sent them on to her (corrected the “typo”). She’s in California, so I can’t really see what she’s doing. But she’s a dear friend and will appreciate all the input.

 

Robin

 

 

From: ml+s1100894n55480h49@.nabble <ml+s1100894n55480h49@.nabble>
Sent: Wednesday, September 16, 2020 9:09 AM
To: SUDSOL Group <rmessenheimer@>
Subject: SU!: Curled Embossing Folder

 

rmessenheimer@gmail.com?subject=Curled%20Embossing%20Folder

If you just reply to this email, your message will go to all SUDSOL members, unless you change the To: email address to the author: rmessenheimer@


Hi, all!

One of my customers has had one of her embossing folders curl up as shown.  It's the Coastal Weave folder which is a 3D folder. She uses a Cricut about which I know nothing. Is there a way to fix this? Image removed by sender.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com

 


If you want the reply to go ONLY to Robin Messenheimer, please change the email address to: rmessenheimer@gmail.com
This message can be found in the SUDSOL Discussion Forum here: http://forum.sudsol.org/Curled-Embossing-Folder-tp55480.html

To start a new topic under Product Q&As, email ml+s1100894n1954h43@.nabble
To unsubscribe from Product Q&As, click here.

Robin Messenheimer Hilo, Hawaii https://robinscraftroom.com